Deck Installation                                                 Deck Renovation

Wood Deck Repair                                                  PVC Deck Repair

 Deck and Porch Repair                                            Porch Renovation

 House addition                                                            Framing Carpentry

 General Carpentry                                                    Furniture assembly

 Stair Installation                                                 Stair Repair

 Home Remodeling                                             Patio Renovation

 Plywood Installation                                          Railing Installation  

General Contractor New York
New Renovation Contractor
Interior Painting Contractor
Exterior Painting Contractor
Carpentry Contractor
Deck Renovation Contractor
Roofing Contractor
Siding Contractor
Tiling Contractor
Kitchen Renovation Contractor
Bathroom Renovation Contractor
Framing Contractor
Flooring Contractor

Making repairs around your home requires a skilled and experienced contractor in order to get the best results.
The first thing to do is take everything off the deck until it’s down to bare boards. Now we check if there’s some repair work necessary or your deck needs a bit of a sand and stain/paint. Washing everything down with a pressure washer. Replace any raised nails and any damaged boards. Then the railings and steps, if appropriate, as there’s no point in just fixing part of the deck, when some elements still look sad. Perhaps there is needed to replace the boards with something a little snazzier – this is totally up to you and your hip pocket. Renovating the back deck can be a really cheap and easy project, or an elaborate one. If you want to keep small children with you on the deck, a childproof gate across the deck entrance can be very handy, but make sure the railings are climb-proof and unbreachable. This option allows you to have the kids or grandkids in the open air with you while keeping a close eye on them. Staining and sealing protects the timber from moisture and UV damage. And don’t forget to maintain the deck once you’ve got it sparkling again. A clean and reseal every couple of years can preserve the timber, and bring out the color and grain. Now you have a spruced up “outdoor room”, you can get creative. If you can have a barbecue set up, place a comfy table and chairs nearby and finish off with a large garden umbrella or shade wing to keep the hot sun off the diners. Once you’ve renovated your deck, this outdoor living space will get some serious use. If the deck is covered, you can install some mood lighting, a fan and/or an outdoor gas heater. If you’re a sun lover, provide a deckchair with a handy side table for a book and a drink. A porch swing is a romantic touch, or try a hammock or swing chair. Another option is to construct timber bench seating – these box-type benches have a lid top that accesses handy storage space within. If you want to bring the garden to your deck, think about grouping pot plants. A wisteria or jasmine vine will look great against the natural timber of a deck and offers a little more shelter from the elements. An alternative idea is to construct timber garden boxes out of the same timber as your deck and install them at the perimeter of the area (just check they meet regulations regarding balustrade heights etc).  Renovating the back deck can be a really cheap and easy project, or an elaborate one. This depends on what you want from your outdoor space and how complex the changes will be. One thing’s for sure, once you’ve renovated this outdoor living space, it will get some serious use. A jasmine vine can be a nice way to bring the garden up high.
Our experienced carpenters deliver a variety of carpentry services from basic to the most difficult carpentries in New York and New Jersey with high attention to detail. Whether it’s something like installing handrails or putting up new deck floors, our crews work with care and precision.

We value our work and our customers.
Our number 1 priority is your satisfaction.
That’s why we are dedicated to the quality of your project.

Splintering decks are usually the result of neglect — occurring after a deck remains untreated and unsealed for a number of years. The lack of protection allows water to soak into the boards, eventually causing them to splinter and crack. Fortunately, all is not lost. It may be hard to get that brand new look back completely, but following a few simple steps can help you bring your neglected decking back to life.

Bleaching splintering decks

Your first order of business is the easiest. Mix up a solution of half-bleach, half-water and spray down your entire decking. If you see areas of deck mold (not unlikely if it’s been a while since your deck’s been treated), hit those especially hard and work at them with a scrub brush until the mold has been removed. Finally, wait for the deck to dry before moving on to the next step.

The bleach does two things: It kills deck mold and mildew, and it bleaches the wood to a uniform color, preparing it for treatment. If you treat a deck that’s at the point of splintering without applying bleach, you’ll end up with dark, unattractive decking. Using bleach will bring out the natural wood look you’re trying to recover.

Sand it down

Once the bleach solution has dried off the deck (it’s a good idea to give it about 24 hours, just to be sure), you can move on to sanding. Since splintering decks mean lots of painful slivers for bare feet, it’s important that you sand down your deck so that you’re once again working with a smooth surface. Renting a large floor sander will certainly speed up the job, though the railings, banisters, steps and other hard-to-reach places will probably need to be done with a hand sander or sandpaper. Finally, rent a power washer and clean off the deck. It’s going to be covered in a fine layer of dust from the sanding, and you’ll need to get rid of that if you want your sealer to take properly.

Treat the deck

Once the deck has dried out a second time, you’re ready to treat the deck. Using a power sprayer drastically reduces the time it takes to treat a deck, though it can be done with paint rollers and brushes if you’ve got the patience. Just be sure to watch out for drips and runs, and to brush them up quickly. Waiting until after the deck is dry to try to get rid of them is almost impossible. Finally, remember to treat your deck on a regular basis (at least every few years). It’s the only sure-fire way to prevent problems like splintering, cracking, rot and mold.

Hiring contractors for the fix

While it’s possible to repair decking yourself, it’s a time-consuming and laborious job — especially if you don’t have the right tools. A decking contractor is experienced enough to repair decking of all sorts, and they will also have the supplies and know-how to get it done right in a fraction of the time.

Contact us for a free estimate about repairing or renovating your deck.